VEX 228-2536 Omni Wheel Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a LEGO compatible file for the VEX 200mm Travel Omni-Directional Wheel when used with LEGO compatible servos.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 541
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a LEGO compatible file that works as an adapter to allow for the VEX 200mm Travel Omni-Directional Wheel to work with LEGO Technic Axles.
There is a 4mm version and a 3mm version. The 4mm version will fit perfectly, and the 3mm version will have a bit more play.
This file can be printed on a standard FFF (Fused Filament Fabrication) desktop printer. You may need support for this one depending on your printer, but you can try a print without support first to see if it works.
Check out the full assembly guide: https://learn.browndoggadgets.com/Guide/VEX+228-2536+Omni+Wheel+Adapter/324
Check out this LEGO-based Omni Wheel Robot: https://learn.browndoggadgets.com/Guide/Omni+Wheel+Robot/310
Assembly Hardware
You will need 4 bolts (12mm in length) as well as 4 matching hex nuts. You should choose either 4mm bolts or 3mm bolts depending on which adapters you print.
4mm Hardware
- 4 x Metric machine screws, Phillips pan head, Zinc plated steel, 4mm x 0.7mm x 12mm
- 4 x Metric hex nuts, Zinc plated class 8.8 steel, 4mm x 0.7mm
3mm Hardware
- 4 x Metric machine screws, Phillips pan head, Zinc plated steel, 3mm x 0.5mm x 12mm
- 4 x Metric hex nuts, Zinc plated class 8.8 steel, 3mm x 0.5mm