1 / 3
GEAR m1.5 z89 FOR LATHE AND OTHER USES
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PRINTABLE IDLE GEAR
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this for my lathe, for driving the feed transmission, original ones are made from bakelite and are using bushings so this is an upgrade, it could be easily printable if it wears out or gets broken. This is used on a middle size 11kW lathe.
Ball bearing:
6201 - 12x32x10
LIKE SHARE COMMENT
my other designs
https://www.printables.com/social/296116-the-sloppy-apprentice/models
https://www.thingiverse.com/thesloppyapprentice/designs
Take a look at my youtube channel: