Curtain rod mounting drill template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This template allows marking of holes to drill and mount a curtain rod 3" or 4" from the top corner of a window frame.
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 243
- Wydruki
- 1
- Wyświetlenia
- 926
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
When you need to mount curtain rods above a window frame, this template provides a quick way to consistently mark accurate drilling holes.
Two holes are available, one at 3” and the other at 4” measured diagonally 45 degrees from the top corner of the window frame.
I’ve included an OpenSCAD model in case you want to modify. Since the typical bracket will have two holes, it would be nice to have an additional hole. However rod brackets vary in size so this template is just for one hole.
Note that it’ a good idea to make sure the top of the window frame is level or else the rod may not be level.