Curtain rod mounting drill template
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.24 – €1.52 net (excluding VAT)
For file: rod-template_0.3mm_PLA_MK3S_1h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.38 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 1.15 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This template allows marking of holes to drill and mount a curtain rod 3" or 4" from the top corner of a window frame.
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 243
- Makes
- 1
- Views
- 927
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
When you need to mount curtain rods above a window frame, this template provides a quick way to consistently mark accurate drilling holes.
Two holes are available, one at 3” and the other at 4” measured diagonally 45 degrees from the top corner of the window frame.
I’ve included an OpenSCAD model in case you want to modify. Since the typical bracket will have two holes, it would be nice to have an additional hole. However rod brackets vary in size so this template is just for one hole.
Note that it’ a good idea to make sure the top of the window frame is level or else the rod may not be level.