Gravity Screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ring that falls down a screw with gravity. The ring will go around exactly 2 times before reaching the top.
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 497
- Wydruki
- 2
- Wyświetlenia
- 2348
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- GNU General Public License v3.0
This model has tight tolerances (0.14 mm), so don't shorten it the along the X or Y axes. Shortening it along the Z axis may work, but might cause it to work poorly. The lid has an even tighter tolerance to help it fit very snugly.
Use as more infill to make the ring heavier and fall more smoothly. A smaller layer height will work better. 25% infill, 3 perimeters, and a 0.1 mm layer height was just enough for it to work well for me.
(I don't have a picture of the model because it was last seen being chewed on by a dog)
(I don't have a dog)
(Edit: found it. Took a picture, but I'm not touching it anymore)