quick Paracord rope clamp 2mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paracordlock for Type I 100 - Version 1.0
- Ocena
- 5 / 5
- Polubienia
- 106
- Pobrania
- 448
- Wydruki
- 4
- Wyświetlenia
- 2200
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Changelog
| Paracordlock | ||
|---|---|---|
| 2022-07-03 | v2.1 | increased holding force for cords with smooth surface |
| 2022-07-02 | v2.0 | initial public release |
| Tool | ||
|---|---|---|
| 2022-07-02 | v0.5 | initial public release |
Paracordlock
Will fit ø2mm/1.9mm diameter paracords.
Obviously not suitable for safety relevant applications.
Assembly tested with PETG and 0.25mm nozzle; does not require support geometry.
Clip type
- does not require screws or additional parts
- consists of three printed parts, plus one accessory assembly tool
- tool only needs to be printed once, and can be reused
- smaller dimensions
- lighter duty
- if dismantling is required, cut open the sleeve or press on the short sides with pliers
BOM Paracordlock
- bottom half
- top half
- sleeve
Assembly
There's a detailed manual with the ø4mm version.
Accessory Tool
Illustration shows functional surfaces highlighted in orange
The tool is used to center the assembly force to the sleeve. It features a slot, so it can be removed from closed loops when -for example- thimbles have been installed.
The tool is specific to this size of Paracordlock; only needs to be printed once and is reusable.
Development
Please comment if something can be improved, or if it works for you. Also don't forget to share makes and application examples!
