Precision Hex Screwdriver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Precision Hex/Allen screwdrivers (M1.6, M2.0, M2.5, M3.0). Created with OpenScad so you could modify for other sizes.…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Precision Hex/Allen screwdrivers (M1.6, M2.0, M2.5, M3.0). Created with OpenScad so you could modify for other sizes. Buy a nice set of hex keys (I like the ones with a ball at the end). You need to print the handle and then one of the key sizes. The handle has a ball and socket that is printed in place. The exploded file is for reference only - do not print. The key L is cut to size and the handle and the key are then glued together. I printed in petg and used Superglue (cyanoacrylate).
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.15
Infill:
20%
Filament: does not matter PETG does not matter
Notes:
The handle has a ball and socket that are printed in place. I used a 0.4 nozzle and a layer height of 0.15 with 20% infill. This may need tweaking depending on your setup.
A simple twist of the handle should separate the ball and socket. You may need to file or dremel the L notch of the key. I found different hex keys have a little different bend radius.
Cut the hex key to size (I used my dremel tool cutoff wheel) and then glue the two printed parts together. I added some SuperLube with a toothpick in between the ball and socket.
Category: Hand Tools