Adapter for Schrader to Pool valve (Crivit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed an adapter to fill my pool with air. This is a lot quicker with an air compressor than with a foot pump. Other…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Needed an adapter to fill my pool with air. This is a lot quicker with an air compressor than with a foot pump. Other designs didn't work out as I expected them, so I created this one within a few minutes.
Best printed with TPU and 15% infill to keep the part somewhat flexible. 3 perimeters should be used to have enough strenght on the nozzle part.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15
Filament: Amazon Basics TPU White
Notes:
Use 3 perimeters to get a strong nozzle part.