1 / 8
Pitch Servo Gimbal for Fatshark 600tvl
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed to work with the Fatshark 600tvl camera and a 9g servo. For the hinge, one can use a thin steel wire…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This was designed to work with the Fatshark 600tvl camera and a 9g servo. For the hinge, one can use a thin steel wire or similar rod. The gimbal can be mounted facing up or down.
- I'm looking for someone to test this for me.
- Also, someone could hep by telling me the dimensions of their frame up front where this would go.
Good instructions for Naze32 setup can be found here: http://www.rcgroups.com/forums/showthread.php?t=2224811
Category: R/C Vehicles
