1 / 9
support for a diy wolverine sharpening system
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
it was saturday, my local metal store was closed so i couldnt buy materials to build a wolverine system by myself...…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
it was saturday, my local metal store was closed so i couldnt buy materials to build a wolverine system by myself... anyway i dont have the soldering stuff either xD
so i went to fusion, made the 2" one that i'd screw to a piece of wood, liked it so much that i made a 1" one.. just in case i wanted a smaller version.
it's pretty foward. Print it, screw it and use it. I'll make a video or upload some pics once i finish the thing.
**EDIT v1:
- The 1" Support has a very ugly failure. I rounded the backside, which made it look nicer but it totally ruins it. So I'll make soon a newer version with a flat back.
- The 2" one works Perfectly! =D really happy how it turned out. And i made a simple base with spare wood to test it and as you can see, it really works out great.
- In hte picture you see an ectra piece printed. it's a remix version of the "VeryGrind"
Category: DIY