Horizontal Dust Separator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horizontal dust separator. The parts all bolt together with 1/4 20 bolts. The outlets on the bottom need to go into a…
- Ocena
- 4 / 5
- Polubienia
- 74
- Pobrania
- 224
- Wydruki
- 1
- Wyświetlenia
- 3859
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Horizontal dust separator.
The parts all bolt together with 1/4 20 bolts.
The outlets on the bottom need to go into a sealed chamber. The air should not blow out of them, the material should just fall out.
Still lots of testing to do.
The prints are fairly large. I have a 280mm x 280mm print bed. You could probably thin some of the flange without causing problems.
Fusion File https://a360.co/372ZY3s
I found that “Woodbutcher and the Mighty Termite” channel on YouTube printed and tested the design and posted a video of it
Print Settings
Printer:
Railcore
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
10
Filament:
PolyMaker PETG
Notes:
I printed with a combination of PETG and Tough PLA and both seemed to work pretty well.
Category: Machine Tools