Horizontal Dust Separator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Horizontal dust separator. The parts all bolt together with 1/4 20 bolts. The outlets on the bottom need to go into a…
- Rating
- 4 / 5
- Likes
- 74
- Downloads
- 224
- Makes
- 1
- Views
- 3,859
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Horizontal dust separator.
The parts all bolt together with 1/4 20 bolts.
The outlets on the bottom need to go into a sealed chamber. The air should not blow out of them, the material should just fall out.
Still lots of testing to do.
The prints are fairly large. I have a 280mm x 280mm print bed. You could probably thin some of the flange without causing problems.
Fusion File https://a360.co/372ZY3s
I found that “Woodbutcher and the Mighty Termite” channel on YouTube printed and tested the design and posted a video of it
Print Settings
Printer:
Railcore
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
10
Filament:
PolyMaker PETG
Notes:
I printed with a combination of PETG and Tough PLA and both seemed to work pretty well.
Category: Machine Tools