Acrylic Front for Polaroid Magnaframe (Magnet Frame)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display your Polaroids without worrying about physical damage or fading from UV exposure.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to display some of my favorite Polaroids on my staircase wall but I didn't want anything to accidentally damage them. Magnaframe seems to be the only game in town as far as Polaroid wall frames go, but their product doesn't offer any protection from prying hands, greasy fingers, dust or UV light.
My solution was to print replacement front pieces that accept 3mm UV-blocking acrylic (plexiglass). These front pieces are flimsy until you add the pane of acrylic and snap them into the Magnaframe back, but after that they're rock solid. I print mine in black PLA on a textured build plate for aesthetics but PETG may also work. Use support material for the thin bridge and be careful when removing it.
I ordered "Acrylic Clear OP-3 Ultraviolet (UV) Filtering" from TAP Plastics in 2021. At the time they offered a custom cutting service. The following cut dimensions were perfect for me and should work for you too, if your printer remains accurate:
| Thickness | 3mm |
| Width | 87mm |
| Length | 107mm |