Wanhou Duplicator i3 M3 thumbscrew
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The grip on these wraps around the top and bottom and works really well. Also included is a spring spacer to keep the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The grip on these wraps around the top and bottom and works really well.
Also included is a spring spacer to keep the springs from bending side to side.
I used a small washer between the thumbscrew and the lower bed to keep it moving smoothly.
This was designed for a Balco printer which is a rebranded Wanhou Duplicator i3 v2.1 sold in Australia by Kogan. It should work for other iterations of the duplicator.
Post-Printing
Some cleanup is required in the nut hole as i did not use any supports. I just gave it a quick hit with a dremel tool
Category: 3D Printer Parts