Wanhou Duplicator i3 M3 thumbscrew
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The grip on these wraps around the top and bottom and works really well. Also included is a spring spacer to keep the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 39
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The grip on these wraps around the top and bottom and works really well.
Also included is a spring spacer to keep the springs from bending side to side.
I used a small washer between the thumbscrew and the lower bed to keep it moving smoothly.
This was designed for a Balco printer which is a rebranded Wanhou Duplicator i3 v2.1 sold in Australia by Kogan. It should work for other iterations of the duplicator.
Post-Printing
Some cleanup is required in the nut hole as i did not use any supports. I just gave it a quick hit with a dremel tool
Category: 3D Printer Parts