Ikea Pax - Screwless Filament Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
3,79 € – 4,64 € netto (bez VAT)
Dla pliku: Ikea_Pax_Brack_Back_0.2mm_PLA_MINI_4h15m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,21 € netto (środek widełek).
- Masa podana przez autora
- 52 g
- Czas druku podany przez autora
- 4,25 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Screwless brackets for filament rack inside Ikea Pax unit
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 1860
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Let me tell you a story!
A few weeks ago I became obsessed with this 3D printer “enclosure” I saw on the Prusa 3D Printing facebook group. I just had to built it, following the posters design almost identically with a few little of my own tweaks, this is one of those tweaks.
Currently, I have one Printer, my Prusa Mini+ but I'm always toying with the idea of a bigger printer or another mini, so I didn't want to permanently adapt the cabinet or have the sides messed up by a poor screw job by myself so I set out on a journey of using only the pre-drilled holes inside the Ikea Pax.
Now, I'm okay with Fusion 360 and I'm okay with Tinkercad and I tend to use these two tools side by side to achieve what I want - Luckily for me a remix existed on thingiverse which had the perfect peg placement, (IKEA Pax Spool Holder (without screws) by MichiKehler - Thingiverse) So I sectioned those off in Tinkercad and then set out designing everything else out in Fusion. This is my result - A little bit of 3D magic, a beauty of a printer and some 21.5mm PVC pipe from Screwfix(FloPlast Overflow Pipe White 21.5mm x 3m | Overflow Waste System | Screwfix.com) for £2.27 and voila. The pipe is long enough for multiple racks as you can see from the photos - I just haven't finished printing the second set of front brackets.
Because of the placement of the holes I made the brackets different shapes, but I imagine you could use the front brackets and then mirror them in the cabinet but this way they sit a little further back.
Remember you'll need two of the back bracket.
I'll be adding this to a collection on my page called Ikea Pax Enclosure, so I have a few little tweaks/addon's that I will add to it all with the same ethos of no Screws!
EDIT: Here is my Screwless Collection:
Ikea Pax - Screwless Collection by RandumbPrints | Printables.com