1 / 2
Vent for walls 90mm/ Entlüftungsgitter für u.a. Fertiggaragen
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Vent was designed to replace the vent in a german prefabricated garage. But it could be used in every wall.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (14)Powiązane
This Vent was designed to replace the vent in a german prefabricated garage. But it could be used in every wall. I included the Fusion 360 file for easy adaptation and Remixes for different sizes.
I printed both on the textured PEI sheet with PETG.
The outer ring can be printed with 2 walls and 20% infill.
The inner part should be printed with 6 wall (so only walls will be printed) and Fuzzy Skin on Outside walls. Default thickness of 0.3mm to create a tight but still moveable fit.