1 / 2
Vent for walls 90mm/ Entlüftungsgitter für u.a. Fertiggaragen — image 1
1 / 2

Vent for walls 90mm/ Entlüftungsgitter für u.a. Fertiggaragen

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This Vent was designed to replace the vent in a german prefabricated garage. But it could be used in every wall.

Rating
5 / 5
Likes
7
Downloads
79
Makes
0
Views
429
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This Vent was designed to replace the vent in a german prefabricated garage. But it could be used in every wall. I included the Fusion 360 file for easy adaptation and Remixes for different sizes.

I printed both on the textured PEI sheet with PETG.
The outer ring can be printed with 2 walls and 20% infill.
The inner part should be printed with 6 wall (so only walls will be printed) and Fuzzy Skin on Outside walls. Default thickness of 0.3mm to create a tight but still moveable fit.