LED panel adaptor tray for Pixl-latr film holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple adaptor that allows you to use a Godox LEDP120C light panel with the Pixl-latr film holder
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
The Pixl-latr is a simple and inexpensive film holder that diffuses backlight allowing you to digitise your negatives or slides using a DSLR (https://www.pixl-latr.com/). I wanted to use the Pixl-latr with a Godox LEDP120C led panel. This LED panel is inexpensive and allows you to vary the brightness and colour temperature. It can also be powered via mains or battery (https://tinyurl.com/y2rzus29). I designed the model in two parts. The bottom tray fits the LED panel and has a cutout for the mains adaptor. The top tray fits on top via the indexing bumps and has a cut-out for the Pixl-latr and side cut-outs if you use strip 35mm film.

Printer Settings
- Filament - PLA
- 0.2mm layer height
- 8% infill
- Support only for the top tray (for indexing holes)
