LED panel adaptor tray for Pixl-latr film holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple adaptor that allows you to use a Godox LEDP120C light panel with the Pixl-latr film holder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
The Pixl-latr is a simple and inexpensive film holder that diffuses backlight allowing you to digitise your negatives or slides using a DSLR (https://www.pixl-latr.com/). I wanted to use the Pixl-latr with a Godox LEDP120C led panel. This LED panel is inexpensive and allows you to vary the brightness and colour temperature. It can also be powered via mains or battery (https://tinyurl.com/y2rzus29). I designed the model in two parts. The bottom tray fits the LED panel and has a cutout for the mains adaptor. The top tray fits on top via the indexing bumps and has a cut-out for the Pixl-latr and side cut-outs if you use strip 35mm film.

Printer Settings
- Filament - PLA
- 0.2mm layer height
- 8% infill
- Support only for the top tray (for indexing holes)
