Search results: godox

Counting matching models…

Printables

godox MF12 loc line 1/2 adaptor

Print as PETG and use tree supporter PLA will crack during the fitting process

Printables

Speedlight Godox V1 Dial Wheel Holder

This part goes under the dial wheel and keeps it connected to the flash body. Print with supports and precision settings with low layer height.

Order a print of this model

Printables

Godox IT30 Pro adapter to SMDV softboxes

I needed to create a lightweight run and gun setup for photoshoots. I bought the Godox IT30 Pro to use with SMDV 20" Beaty dish. You can use the SMDV speed light adapter , but with this one IT30 Pro sits deeper and you can use the hotshot…

Order a print of this model

Printables

GODOX TT685 accessories

For my GODOX TT685 I designed some light shapers. The base unit slides on the lighthead of my flash. It is lined with some textile tape (aliexpress textile tape for cable looms). Nice tight fit and no scatches. For the grid you have to…

Order a print of this model

Printables

Godox iT32 MagMod Adapter

The original MagMod MagGrip is too long that it prevents the Godox iT32 from tilting down fully. This adapter solves that problem. Simply press four 10x5x2mm rectangular magnets into each side and you will be able to attach MagMod…

Order a print of this model

Printables

Godox iT30 Pro MagMod Adapter

The real MagGrip from MagMod doesn't fit the Godox iT30 Pro very well. It can't go on all the way and even if it did, it blocks all the ports forcing you to take off the mag grip every time you want to charge the flash. This adapter fits…

Order a print of this model

Printables

godox iT30 pro flashgel holder

i guess i'm into photography now. this will hold basic colored plastic sheets, fits the godox it30pro

Order a print of this model

Printables

Skadis holder with charge port hole for Godox C01 Lavalier Mic (No supports)

I needed a way to store my Godox lav mic when I'm not using it, but make it easy to grab. So here's my Godox mic holder for my skadis pegboard. My gain is your gain. Recommend brim due to the hook's small footprint, but brim helps if that…

Order a print of this model

Printables

Godox iT30 Pro Filter Holder

Much of my photography is travel and street. I was carrying around a large Godox V860II. The Godox iT30 has not just lightened my bag, it makes me want to pull it out in new a creative ways. I wanted to use my Selens filter kit (…

Order a print of this model

Printables

Godox SL150 Rosette Hirth Joint Replacement - Studio Light Lamp Sparepart

Studio lighting typically utilizes a Rosette or Hirth joint mechanism to enable tilting and secure the angle in place. On the Godox SL150, this mechanism relies on two plastic pins that bear the majority of the light's weight when angled.…

Order a print of this model

Printables

Godox V860IIIN Mini Stand / legs

have your lost your Godox "legs"? New one are quite expensive for a piece of plastic, right? Print it! I have added a hole at the back, so you can melt in a screw insert if you want

Order a print of this model

Printables

Honeycomb flash grid Godox V860 III Öffnungswinkel 10°, 20° und 30°

Honeycomb Flash Grid for Godox V860 III Öffnungswinkel 10°, 20° und 30° The material is PETG | PLA, but you can also choose a different one. Printed with a 0.6mm nozzle and 0.4mm layer height

Order a print of this model

Printables

Gridfinity Godox xt2 X2

size : 3X2 u total height : 90mm

Order a print of this model

Printables

Godox AD600 Pro Handle

Handle for the Godox AD600 pro studio flash. I printed at 4 wall thickness and 80% infill with gyroid fill pattern and it seems very strong. You will need slightly longer than stock bolts I used m3x16 bolts with small washers Aligned to…

Order a print of this model

Printables

A Gridfinity case to hold a Godox V860ii battery.

Print it and go. I used lightning infill for speed and it is more than strong enough. The battery fits like a glove.

Order a print of this model

Printables

godox MF12 loc line 1/2 adaptor

Print as PETG and use tree supporter PLA will crack during the fitting process

Order a print of this model

Printables

Godox X1T/XPRO cover for hot shoe mount contacts

Small cover to protect the contacts of you flash remote from scratching other parts in your camera bag. Slides on the contacts easily with a single motion. Tested with remote for Olympus but might work for other mounts too. Feel free to…

Order a print of this model

Printables

Inner diffuser hooks for Godox softbox SGGV6060

Optimized hooks for the inner diffuser sheet of the foldable Godox 60cm x 60cm Softbox (Godox SGGV6060). The inner diffuser attaches to elastic loops inside the Softbox with four small self-locking steel hooks that are fiddly to attach…

Order a print of this model

Printables

Ergodox

Angled Ergodox wristrest

Order a print of this model

Printables

Godox AD200 pro blub to graflex adapter

This requires 3x4mm+1x3mm banana plug, which shoud not come with any grip.

Order a print of this model

Printables

Godox AD200 Umbrella Mount

Allows an umbrella or other shaft-based light modifiers to mount directly to one of the two ¼-20 tripod points on an AD200. I've included the “short” version in case somebody wants it, but the one marked “long” is a big improvement in…

Order a print of this model

Printables

Canon MP-E 65mm flash adapter ring for Godox MF12

I designed this adapter ring to allow me to mount my Godox MF12 macro flashguns to my Canon MP-E 65mm macro lens. This lens has no filter thread, so there is no out-of-the-box way of attaching the thread-mounted MF12 mounting ring to the…

Order a print of this model

Printables

Godox Light Tent Box Clips

Clips for easy mounting softbox fabric. Allowing easy access to shoot from upper side of photo box. Should be compatible with all Godox photo tents/boxes for macro photography. Printed in PETG.

Order a print of this model

Printables

mini Bowens speed ring for Godox light modifiers

Description mini Bowens mount speed ring for Godox light modifiers (soft box) Print instructions Printing info: Printed on Prusa MK4S, PC 0.20mm layers 50% cubic infill PC or other high strength filament needed to support weight of light…

Order a print of this model

Printables

Ergodox Tent and Wrist Rest Base

This is a tented riser for the original Ergodox with the layered acrylic case. It takes the place of the bottom acrylic layer. It adds tenting and a wrist rest. The files here add 6° of tenting. There are two versions, one that takes M3…

Order a print of this model

Printables

Ergodox Mechanical Keyboard

Big thanks to AGuyFromOhio for actually doing the hard work and designing the case I remixed this from (on Thingiverse: https://www.thingiverse.com/thing:2533064). I'm using it since over a year now and I'm super happy with it. I ended up…

Order a print of this model

Printables

Godox Lux Senior Reflector 神牛复古闪光灯反光罩替换件

Include two versions, mono one and splitted one. Splitted version allows the reflector to be screwed off for folding. Recommend using resin printer for screw fitting and surface finishing. 存在一体版和分体版，分体版可以用螺纹拧下反光罩以便折叠收纳。推荐使用光固化。

Order a print of this model

Printables

Keycaps - Ergodox compatible

Description : These keycaps combine a typewriter-inspired font with a central groove for improved comfort and style. Designed for resin 3D printing, they are ideal for anyone looking to upgrade their mechanical keyboard with a unique and…

Order a print of this model

Printables

Godox VB-18 Flash Battery Charger Holder for IKEA SKÅDIS

This custom Godox VB-18 Battery Charger Holder is designed for the Godox V860II flash and is compatible with the IKEA SKÅDIS pegboard. The holder allows you to position the charger with the charging port facing up or down , depending on…

Order a print of this model

Printables

Ergodox EZ Wrist Wrests

Ergodox EZ Wrist rests. Put the f3d model in so you can import it easily and make adjustments to height/width depending on hands. Mirror in slicer to get both halves

Order a print of this model

Printables

Godox XPro flash trigger sync door

Replace your broken Godox Xpro sync door TPU 100% infill 0.1 layer

Order a print of this model

Printables

Godox X1R flash receiver sync door

Replace your broken Godox X1R sync door TPU 100% infill 0.1 layer

Order a print of this model

Printables

Milwaukee M12 Laser Adapter plate for Godox Tripod Head

I'm using a Milwaukee M12 laser with an Amazon Basics tripod and a tripod head for a Godox flash. The head had has some small protrusions that prevent the laser's base from sitting flat on the head. This thin adapter plate fixes the…

Order a print of this model

Printables

Godox IM30 flash diffuser

You can use this 3d printed diffuser to soft the Godox IM30 flashlight. I suggest to print using matte white filament (I used overture matte white) but you can use any coloured or translucent material to obtain artistic effects. Scale…

Order a print of this model

Printables

DIY Honeycomb Grid Godox AD200 / V1

I designed a 20° and 30° honeycomb grid compatible with the Godox AD200 / V1 flash and the AK-R1 kit - that actually works. The included grid in the AK-R1 kit is a joke and does not work very well creating a small soft spot light. Be…

Order a print of this model

Printables

Godox IM30 Flash Diffuser

This diffuser can be made out of PLA or PETG, it mostly depends on what kind of effect you want to obtain. I made it out of both transparent PETG as well as a slightly translucent white PLA, I kind of prefer the results with PETG. I…

Order a print of this model

Printables

Godox Lux Master Pro to AK (AD100/V1/V100) Accessory Adapter

The model allows the Godox Lux Master flash to use the AD100/V1/V100 magnetic mounted accessories. The model will need a manually configured pause for magnet insertion. Its setup for 16 total 3mm x 1mm magnets. two stacks of two magnets…

Order a print of this model

Printables

Diffuser for a Godox V860III Speed-lite

this diffuser is meant to be used with a Cannon R50 and a Laowa 90mm macrolens. It's dimensions are suitable for the flash unit mounted with a hot shoe adapter to the on top of the camera (see photos) Three parts The print consists of…

Order a print of this model

Printables

Battery door replacement Godox X1T and Neewer N1T

lost door for one of my units, printed this to replace it compatible with Godox X1T and Neewer N1T (also all of its variants like X1TS X1TN X1TC… and so on) X1 T and N1 T are the same thing, just neewer rebranded the godox thing, that's…

Order a print of this model

Printables

Resin Honeycomb Grid Godox AD200 / V1

This is for resin printing only! If you want to print it with FDM check out my other honeycomb grid here: https://www.prusaprinters.org/prints/128513-diy-honeycomb-grid-godox-ad200-v1 10°, 20° and 30° honeycomb grid compatible with the…

Order a print of this model

Printables

Godox AD300 Pro softbox gel holder

I got me some of these new compact & foldable Godox softboxes AD-S60S, AD-S65W, AD-S85S, etc. for my Godox AD300Pro's. They work just fine but I wanted to use the magnetic color gels from my AK-R1 kit with them. So I decided to design my…

Order a print of this model

Printables

Ergodox EZ complete split keyboard

File contains two folders: 1. Ergodox EZ case by CRYPTOPJONES 2. Sculpted Keycaps by v6ak As an owner of this keyboard I DO NOT recommend you buy it, but if you have one already these files will allow you to customize and alter it in…

Order a print of this model

Printables

Diffuser for Godox V1

This product is printed in two colors. I recommend using a transparent material for the first light-emitting part you print. The color combination shown in the product photo will result in approximately -1EV compared to before use. The…

Order a print of this model

Printables

Gridfinity Godox TT685 TT685 II Holder stackable 12u version

Increased the height of the original model two 12u.

Order a print of this model

Printables

Speedlight Godox V1 Dial Wheel Holder

This part goes under the dial wheel and keeps it connected to the flash body. Print with supports and precision settings with low layer height.

Order a print of this model

Printables

Custom Light Shade Adapter for Mamen SL-C60R (Works with Godox BD-04 & Accessories)

Description: This is a custom-designed 3D printable light shade adapter for the Mamen SL-C60R RGB COB Video Studio Light (also compatible with similar models like the MIAOTU G100). Key Features: - Enlarged shade diameter for improved…

Order a print of this model

Printables

Diffuser for Godox TT685 II + grid

This is a diffuser for the Godox TT685 II. It has the option to slot in a Grid. You should print it with transparent white filament. The main body needs supports for the grid slot. For the Grid use the modify_diffuser, set bottom and top…

Order a print of this model

Printables

Godox LDP8BI Flat Base Stand

Base stand for Godox LDP8BI LED Panel

Order a print of this model

Printables

Godox LDP8BI - Negative holder

These two masks are designed to be put between a Godox LDP8BI and film holder designs from samw427: https://www.thingiverse.com/thing:4620992

Order a print of this model

Printables

Godox Propac PB960 Light Stand Mount

This bracket is to securely mount the Godox PB960 battery pack to a standard light stand. This is ideal if you intend to use them in the studio or on location. You can safely move the stand without worrying about the battery pack getting…

Order a print of this model

Printables

Godox IT30 Pro adapter to SMDV softboxes

Order a print of this model

Printables

Dummy Flash Shoe for Godox AD100Pro and Leofoto FA-09

Some Explanations: Surely the Godox AD100pro comes with a quite usable fastening and so there is firstly no need for a 3D Printed part. But in my case i needed a minimised distance between a small "ball head" (in this case the LeoFoto…

Order a print of this model

Printables

Godox MF12 to 72mm magnetic round-adaptor

Godox MF12 to 72mm magnetic round-adaptor (i.E. Godox AD100pro , Godox V1 , Godox V100 [not tested]) The image shows the adaptor together with a magnetic diffusor (other project) As i own quite a couple of lightformers and diffusors for…

Order a print of this model

Printables

Magnetic Gel Holder Ring for Godox AD100, AD200, V1 (Ø 3 × 3 mm Magnets)

Overview Two part, threaded holder that uses 3x3 mm magnets to snap colour-correction gels onto Godox round heads. Sized for gels cut to Ø 70-71 mm. Compatibility Godox AD100 Pro Godox V1 (all mounts) AD200/AD200 Pro with H200R round head…

Order a print of this model

Printables

ErgoDox EZ display stand

Order a print of this model

Printables

Godox Movelink Microphone Handheld Grip

Handheld Grip for Godox Movelink Microphone This grip works with both the 1st and 2nd generation Movelink microphones. I've attached a microphone foam cover (windscreen) that you can find anywhere onto the top of the part. I've also…

Order a print of this model

Printables

Godox VB26 Gridfinity Holder

Personally trying to organize my photo gear which requires a bunch of different batteries. I have a Godox VING 860 flash that uses the VB26 batteries. I printed this using a 3x1 profile of the Gridfinity platform. I added a bit of padding…

Order a print of this model

Printables

Godox V1 Magnetic Diffuser

Print at .2mm and do a filament change at 2.2mm and insert 6mm x 1.5mm round magnets and continue the print so the magnets are embedded into the print.

Order a print of this model

Printables

Standfuß für Godox TL120

Lampe kann senkrecht aufgestellt werden.

Order a print of this model

Printables

Magnetic Grid for Godox V100

Magnetic Grid Modifier for Godox V100 Flash Light This 3D-printed magnetic grid attachment is designed specifically for the Godox V100 flash light. The grid provides precise beam control and directional light shaping, essential for…

Order a print of this model

Printables

Magnetic Diffuser Modifier for Godox V100 Flash

Magnetic Diffuser Modifier for Godox V100 Flash This 3D-printed magnetic diffuser attachment is specifically designed for the Godox V100 flash light to soften and diffuse harsh light output. The diffuser provides professional-quality…

Order a print of this model

Printables

GODOX TT685 accessories

Order a print of this model

Printables

Mountable Ergodox Case

This case allow you to tripod mount your Ergodox or mount the two halves in various positions on the edge of thinner desks. Inspired by Ben Vallack's video: The Perfect Tenting Solution for Split Keyboards . Hardware 1/4“-20x6.4 Brass…

Order a print of this model

Printables

Godox iT32 MagMod Adapter

Order a print of this model

Printables

Godox iT30 Pro MagMod Adapter

Order a print of this model

Printables

godox it30 pro diffuser

Diffuser for the godox it30 pro. There don't seem to be any accessories available for this flash, either first party or on any 3d parts website, so I decided to design my own. Also the TR-S tilting adapter isn't available in any store…

Order a print of this model

Printables

Godox AD 100 USB door Cover

Godox AD 100 USB door Cover Print with TPU

Order a print of this model

Printables

godox iT30 pro flashgel holder

i guess i'm into photography now. this will hold basic colored plastic sheets, fits the godox it30pro

Order a print of this model

Printables

Skadis holder with charge port hole for Godox C01 Lavalier Mic (No supports)

Order a print of this model

Printables

Godox iT30 Pro Filter Holder

Order a print of this model

Printables

godox v350 macro diffuser with diffuser cap

i fount the flash diffuser and just added a cap. i printed this rectangle side down and made it in matte PETG i thought i had the v350 but i have the v480 so i had to made my own diffuser but madit it with the same everything and it works…

Order a print of this model

Printables

Godox SL150 Rosette Hirth Joint Replacement - Studio Light Lamp Sparepart

Order a print of this model

Printables

GODOX photo video light SL60/SL200 adapter for third parties soft boxes

Universal adapter to third parties soft boxes for GODOX light SL60/SL200 3 walls, 15% infill Cross Hatch. Add a few modifiers to 80% infill as shown on the last photo. I recommend printing from heat-resistant durable materials such as ABS…

Order a print of this model

Printables

Godox AD200 - EC200 to AD-E2 Mount Adapter

The stock AD-E2 mount is not directly compatible with the EC200 extension cable head, so this adapter allows a secure mounting. Should be compatible with other cold shoe devices (not tested) Printing tips: No supports required Infill…

Order a print of this model

Printables

Ergodox usb hub tent

I blatantly ripped off the ergodox tenting stand https://github.com/Ergodox-io/ergodox-tent so i could put in a shelf for the amazon basics four port usb hub. addendum. I have experienced tolerance issues with my .4mm print with the top…

Order a print of this model

Printables

Godox V860IIIN Mini Stand / legs

have your lost your Godox "legs"? New one are quite expensive for a piece of plastic, right? Print it! I have added a hole at the back, so you can melt in a screw insert if you want

Order a print of this model

Printables

Godox P260C Pro LED Light Panel Stand

The Godox P260C Pro LED light panel offers exceptional light quality and brightness uniformity, can achieve incredibly high brightness, and is reasonably priced. It can be powered via the included power adapter, two NP-F batteries, or a…

Order a print of this model

Printables

Bowens Godox Neewer sofbox adapter

replacement for S bracket - for bowens strobes or other lights tight fit, holds well print with supports so it doesn't snap when mounted

Order a print of this model

Printables

Camera Flash Diffusor with replacable inserts - Godox/Neewer/Yongnuo compatible

Simple holder + inserts to bring life into models eyes works as Bounce Card replacement tested with Godox TT685 II, TT600, Yongnuo 560 II, Neewer NW880 should work fine with Canon/Nikon or other strobes too if they have similar head, but…

Order a print of this model

Printables

Magnetic Honeycomb Grid for Godox Round Head Flashes (AD100, AD200, V1)

Print settings Choosing the Beam Angle This model uses PrusaSlicer's Honeycomb infill to generate the optical grid. Honeycomb grids can project wider or narrower beams depending on hexagon size and depth - see photos for reference (shot…

Order a print of this model

Printables

Magnetic round head adapter for Godox V350 - for magnetic gels and diffusers

Print settings Your regular print settings. No supports required. Recommmended materials PETG matte black PC Blend or ASA PLA I didn't test. Might heat up with high power strobes. Supports: None Files included PrusaSlicer (.3MF) project…

Order a print of this model

Printables

Gridfinity Godox IT32 Bin

gridfinity bins for the godox it32 flash + accessoires

Order a print of this model

Printables

Gridfinity Godox IT30pro bin

a gridfinity bin, variants for the flash alone + flash in combination with a flashgel-adapter

Order a print of this model

Printables

Godox AD600 Gel and Grid Adapter This is a 3D printed adapter designed f

Godox AD600 Gel and Grid Adapter This is a 3D printed adapter designed for the Godox AD600 standard reflector cap. It allows you to attach lighting gels and includes a built in grid to help control light spread and reduce spill. The…

Order a print of this model

Printables

ErgoDox Infinity full hand case extension

This print replaces two of the acrylic spacers for the ErgoDox Infinity to add built-in wrist rests to your keyboard. It is based on the original case files (available on the Input Club GitHub ). This version features: Full-hand…

Order a print of this model

Printables

PrintDox Ergodox Case Tent

This tent is designed for the PrintDox Ergodox case This will slide onto the inside edges of the case and hold an ergodox at about 7.5° and has holes for some rubber feet (similar to these). I've included the file for 10° and the FreeCad…

Order a print of this model

Printables

Ergodox PrintDox keyboard case tilt adjustment

This is a tray that adds custom tilt holes to the fantastic printable Ergodox case, PrintDox . It snaps around the PrintDox. It's designed to use M6 screws and nuts. Here's a link to my magnetic feet if you want to get real fancy with it.…

Order a print of this model

Printables

Ergodox EZ wing rist rest tilt adjustment frame

I love the Ergodox ez and it's tilt adjustment, so i made a tilt frame for it's wing wrist rest . The frame snaps around the wings, and M6 nuts and bolts allow for dynamic tilting. I've added the .f3d file if you want to tweak placement…

Order a print of this model

Printables

Bowens Speedring Adapter for Godox Foldable Softbox with S Bracket

Designed this in FreeCAD to fit Godox 60×60 foldable soft box that comes with an S-type bracket onto my Godox SL100D videolight. The FreeCAD (v0.16) source file is included. I've explained the whole process in this video:…

Order a print of this model

Printables

Cover for Godox Reflector Umbrella Hole

A cover to keep the umbrella hole in the Godox AD-R6 7" Bowens Mount Reflector from leaking light when an umbrella is not being used. Print it in TPU and then just snap it into place. I figured this would be easy to lose, so there are 3…

Order a print of this model

Printables

Ergodox EZ style foot for keyboard

Simple keyboard leg in the style of Ergodox EZ. Used with https://www.printables.com/fr/model/263205-viterbi-rev-20-keyboard-middle-plate-foot for my viterbi keyboard Category: Computer

Order a print of this model

Printables

Honeycomb grid for Godox LEDM32

Honeycomb grid for Godox LEDM32 light.

Order a print of this model

Printables

Godox MF-R76 Ring Flash Adater Plate for Laowa 25mm F2.8 2.5-5X Ultra Macro Lens

Print Settings Printed in PLA with a .6mm nozzle, .2 Layer height, 100% infill. 9 grams of material. Should print fine with a .4 or a .8 nozzle, .2 layer height is important for tolerances. Design Notes Since PLA prints smooth, I found…

Order a print of this model

Printables

Softbox Godox sa-30 photo lamp mount.

Hi My task was to create a GODOX SA-30 soft box holder for a photo lamp that has an umbrella holder. A simple design consisting of a ring with 4 screws, a place to fit the holes in the mounting ring of the soft box, and a hole for a rod…

Order a print of this model

Printables

Ergodox EZ Wrist Rest Risers with holders for pens, USBs, SD cards and the all powerful paper clip

Since I always have my keyboard around and in the same place, I figured I could use it for organization. I noticed that I found the wrist rests to be really uncomfortable and it felt like they didn't support me. I somewhat solved that by…

Order a print of this model

Printables

Ergodox Wrist rest risers with holders for pen, USB, smartcard and paperclip (NOT compatible with Ergodox EZ!)

* Note: This motel is NOT* compatible with the Ergodox EZ. It's higher than the EZ can go.** If you have the EZ, check out this design instead. Since I always have my keyboard around and in the same place, I figured I could use it for…

Order a print of this model

Printables

Ergodox EZ Wrist Rest with customizable height and angle

After failing to find (or design) a comfortable wrist wrest ever since I bought my Ergodox EZ I think I've finally made a design which does the job well. The left and right wrist rests are printed as is. The supports are printed depending…

Order a print of this model

Printables

Ergodox tents (full-hand)

I was tired of my janky tents I just velcro'd on to the bottom of my hergodox, so I made this. I chose a tent angle of 17-degrees b/c its what i had before, but using the Onhape doc, you can plug in any angle you like. I made this with…

Order a print of this model

Printables

Elinchrom Rotalux Speedring deflector bracket for GODOX AD400PRO

I've bought the amazing GODOX AD400PRO with Elinchrom mount. But I soon realized, that I cannot use my Elinchrom deflectors anymore. The AD400PRO is missing the mounting hole. I've designed and 3d printed brackets on my Prusa i3 MK3 from…

Order a print of this model

Printables

Godox Godox-x mount adapter for AK-R21

The Godox AK-R21 is made to fot the Godox AD100 flash. I want to use it with my AD300 Pro flashes so I created this adapter. After printing I added some silver tape inside to reflect as much light as possible. I included the Fusion 360…

Order a print of this model