Macro Diffuser for Godox V1 Flash for Nikon - Slim
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slim version of my magnetic diffuser for the Godox v1 flash, intended for use with a macro lens.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 56
- Makes
- 1
- Views
- 624
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
*This is an upgraded/alt version of this model. This version is a slimmer more sleek version*
This model is made as a very cheap alternative to the commercial macro diffuser options.
If you have relative good bed adhesion, you can print this just using skirt and brim and no other supports. I recommend using 0.3mm layer height.
What you need:
8 circular magnets ( 5mm x 3mm ) the stronger the better. I have tested it with cheap magnets from Temu/Wish, and they are able to hold it fine... but it is better to use strong magnets.
It's a really tight fit for the magnets, you will properly need something to push them in with, I recommend using something magnetic, this makes it much easier to steer the magnets in. If you want to be sure they stay in place I recommend using super glue as well.
Optional:
Metallic tape, I use silver, but you could also use gold or bronze if you want a warmer flash.
The tape is simply to direct more light down, towards the subject, but it also serves as a way to not blind everyone around you.
Recommended Filaments:
Clear PLA filament (made for prusa)
Prusament PLA Pristine White (I tested and the Pristine White wont turn the flash yellow, like some other white PLA's will)