Macro Diffuser for Godox V1 Flash for Nikon - Slim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim version of my magnetic diffuser for the Godox v1 flash, intended for use with a macro lens.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 624
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
*This is an upgraded/alt version of this model. This version is a slimmer more sleek version*
This model is made as a very cheap alternative to the commercial macro diffuser options.
If you have relative good bed adhesion, you can print this just using skirt and brim and no other supports. I recommend using 0.3mm layer height.
What you need:
8 circular magnets ( 5mm x 3mm ) the stronger the better. I have tested it with cheap magnets from Temu/Wish, and they are able to hold it fine... but it is better to use strong magnets.
It's a really tight fit for the magnets, you will properly need something to push them in with, I recommend using something magnetic, this makes it much easier to steer the magnets in. If you want to be sure they stay in place I recommend using super glue as well.
Optional:
Metallic tape, I use silver, but you could also use gold or bronze if you want a warmer flash.
The tape is simply to direct more light down, towards the subject, but it also serves as a way to not blind everyone around you.
Recommended Filaments:
Clear PLA filament (made for prusa)
Prusament PLA Pristine White (I tested and the Pristine White wont turn the flash yellow, like some other white PLA's will)