Macro Diffuser for Godox V1 Flash for Nikon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple magnetic diffuser for the Godox v1 flash, intended for use with a macro lense.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 63
- Makes
- 0
- Views
- 769
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This model is made as a very cheap alternative to the commercial macro diffuser options.
NO SUPPORTS NEEDED, I recommend using 0.3mm layer height.
What you need:
8 circular magnets ( 5mm x 3mm ) the stronger the better. I have tested it with cheap magnets from Temu, and they are able to hold it fine..but it is better to use strong magnets.
It's a really tight fit for the magnets, you will properly need something to push them in with, I recommend using something magnetic, this makes it much easier to steer the magnets in. If you want to be sure they stay in place I recommend using super glue as well.
Optional:
Metallic tape, I use silver, but you could also use gold or bronze if you want a warmer flash.
The tape is simply to direct more light down, towards the subject, but it also serves as a way to not blind everyone around you.
Recommended Filaments:
Clear PLA filament (made for prusa)
Prusament PLA Pristine White (I tested and the Pristine White wont turn the flash yellow, like some other white PLA's will)