Godox Movelink Microphone Handheld Grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handheld Grip for Godox Movelink Microphone
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Handheld Grip for Godox Movelink Microphone
This grip works with both the 1st and 2nd generation Movelink microphones. I've attached a microphone foam cover (windscreen) that you can find anywhere onto the top of the part. I've also included an image showing the dimensions of the foam cover I used.
I used the fuzzy skin setting to prevent the grip from slipping when held and to hide the layer lines, but you can print it without using this setting.
Important Note: The print may fail if your print bed's adhesion is poor. In such a case, using support will help the print stick better to the bed. If you don't have bed adhesion problems, you don't need to use supports.