Godox Movelink Microphone Handheld Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handheld Grip for Godox Movelink Microphone
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Handheld Grip for Godox Movelink Microphone
This grip works with both the 1st and 2nd generation Movelink microphones. I've attached a microphone foam cover (windscreen) that you can find anywhere onto the top of the part. I've also included an image showing the dimensions of the foam cover I used.
I used the fuzzy skin setting to prevent the grip from slipping when held and to hide the layer lines, but you can print it without using this setting.
Important Note: The print may fail if your print bed's adhesion is poor. In such a case, using support will help the print stick better to the bed. If you don't have bed adhesion problems, you don't need to use supports.