Portafilter stand for the DeLonghi Dedica
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sitting the spouts of your portafilter on the bench while you tamp is... gross. Use this stand instead!
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 243
- Wydruki
- 0
- Wyświetlenia
- 1118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got tired of my portafilter being unstable and having the spouts touch the bench. So, I made this stand. The spouts nest nicely in the base and the extended arm cradles the handle for a level portafilter.
The spout are cut out to each side to allow for easier cleaning - just rinse it under water.
I use a slightly modified portafilter (plastic spout guide removed) but the unmodified one should still work with this design.
Printing Instructions
This should print without any special settings. I used a 0.6 mm line width and a 0.2 mm layer height, but nothing here should be critical.
Filament
Use what you want - this design isn't picky. I printed it in standard IIID Max Light Blue PLA.