Portafilter stand for the DeLonghi Dedica
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sitting the spouts of your portafilter on the bench while you tamp is... gross. Use this stand instead!
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 244
- Makes
- 0
- Views
- 1,124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I got tired of my portafilter being unstable and having the spouts touch the bench. So, I made this stand. The spouts nest nicely in the base and the extended arm cradles the handle for a level portafilter.
The spout are cut out to each side to allow for easier cleaning - just rinse it under water.
I use a slightly modified portafilter (plastic spout guide removed) but the unmodified one should still work with this design.
Printing Instructions
This should print without any special settings. I used a 0.6 mm line width and a 0.2 mm layer height, but nothing here should be critical.
Filament
Use what you want - this design isn't picky. I printed it in standard IIID Max Light Blue PLA.