Duplicator 6 BLTouch Mount

BLTouch mount for the Duplicator 6.

For the Duplicator 6+ see the mount by user zauberflo: https://www.thingiverse.com/thing:2894669

I used the holes for the bearing set screw to hold the mount. Use M3x8 or M3x10 screws to mount to print head.

The fork of firmware that I update once in a while that supports the bltouch is here: https://github.com/dot-bob/Marlin-Duplicator-6/tree/1.1.x-bltouch

A precompiled version is available here: https://github.com/dot-bob/Marlin-Duplicator-6/releases/tag/Auto-Marlin-1.1.X-bltouch

I have added example configurations to marlin mainline for the standard Duplicator 6 that can be modified to add BLTouch support if you want the latest and greatest version of Marlin. Compare Configuration.h, Configuration_adv.h, and pins_ULTIMAIN_2.h from my fork for the changes.

See: https://github.com/MarlinFirmware/Marlin

Note: the BLTouch is wired to both the z limit connector and analog connector. Power is from the analog connector pins 2 and 3, servo signal is z limit pin 1, and limit function moved to analog pin 1.

I wired using a four conductor ribbon cable using the signals mentioned above.

Print Settings

Printer Brand:

Wanhao

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Category: 3D Printer Accessories