Phanteks Light Strip holder for LianLi o11 Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guides for the Phanteks Neon LED light strips and is designed to fit the Lian Li o11 Dynamic Mini case.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 1726
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These guides exactly fit two Phanteks Neon light strips inside a Lian-Li O11 Dynamic case.
The one guide is designed to be stuck to the back with double sided tape and guides a strip around the GPU and a 120mm rear fan.
The other is designed to be mounted to the fans/280 radiator on the right of the case. The feet are separate to the guide so that these can be mounted then glued to the rail in the exact location they need to be as this may vary depending on radiator/fan configuration. I used CA glue which holds it very well.
I needed to print the larger mount in two separate pieces as I printed on a Prusa Mini, a bit of CA glue holds it well enough when the light bracket is in place.
The light strips should friction fit well enough.
In my case I have it fitted to a 280mm Arctic Freezer II radiator. It should fit the fan mounts on the case, or any other 280mm radiator