HVAC Register Indexing Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a snap in clip for the shown HVAC register vents to lock the register in the desired position and prevent it…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a snap in clip for the shown HVAC register vents to lock the register in the desired position and prevent it from falling to the closed position. This design has 13 notches that the damper can be set and held into, however from my experience most of the registers only will allow adjustment to about half of them.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Hatchbox PLA
Black
Notes:
Black filament made the part stand out and is what I had to design with, however white should be very discrete and hardly noticeable.
For optimum strength and hold the part should print vertically but this requires supports. Printing horizontally appears to work as well but it does not grip the damper as well and broke when removing.Post-Printing
Category: Household