XT60-Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for an XT60 plug or socket.
- Ocena
- 5 / 5
- Polubienia
- 167
- Pobrania
- 1389
- Wydruki
- 4
- Wyświetlenia
- 5062
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Holder for an XT60 plug or socket with latching function to release the plug or socket without tools. Designed and drawn in FreeCAD, file for FreeCAD and CHITUBOX available. I printed mine with an Elegoo Saturn, directly on the platform, without support structure, with SIRAYA Tech Build resin.
CHITUBOX files are also available for SIRAYA Tech Fast and SIRAYA Tech Blu, but these have not (yet) been tested (printables does not support .ctb yet, but check out the Thingiverse).
No or only a small modification to the plug/socket is necessary, in some cases the polarisation of the plug is marked by a protruding plus (+) or minus (-), these must first be levelled with a knife or other tool (see picture below).
Possibly also printable with an FDM printer with a fine nozzle, but this has not (yet) been tested.