Bike Stand Stopper for Vaccum Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bumper made for vacuum cleaner
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I have a Shark IQ (vacuum robot) and it's always trying to climb the legs of a bike stand (Delta Michelangelo Canaletto), so I made this snap-on stopper.
It's 42mm tall and the slot is 29mm (diameter).
It's easy to print and install. NO SUPPORT needed.
=====
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
15%
Filament: Hatchbox ABS Blue
Notes:
No need for supports.
Resolution and build plate adhesion is up to you, it'll not affect the final result.
Choose a good combination of perimeter and infill, after all the vacuum robot will keep crashing on the stopper, although it doesn't crash that hard, the stopper has to be strong enough.
Category: Household