Stand Alone Main Control Case modifications
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified some parts of this design to suit my needs. most mods are to accommodate SSR for 120v bed. Body: Removed the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Modified some parts of this design to suit my needs. most mods are to accommodate SSR for 120v bed.
Body: Removed the support pillar. print with supports in the appropriate places.
Base: Moved and added a second power switch for SSR. Added hole for a breaker button for SSR.
Shelf: Made a shelf that will accommodate a relay and buck converter used in pi setup. Shelf has ramp to lower section of case to allow for better air flow from fan to SSR heatsink.
Bottom level fans: Shorted the fan casing as much as possible and added a hat that the SSR heatsink can slide onto.
Shelf fans: Made a shelf that will hold three fans to blow air across the relay, buck and SSR.
SSR Heatsink: https://www.amazon.com/gp/product/B08ZCYBPTV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Power Switches: https://www.amazon.com/gp/product/B083NP3ZKC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Breaker: https://www.amazon.com/gp/product/B08RBLZF9L/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Category: 3D Printer Parts