Stand Alone Main Control Case modifications
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified some parts of this design to suit my needs. most mods are to accommodate SSR for 120v bed. Body: Removed the…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 1
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Modified some parts of this design to suit my needs. most mods are to accommodate SSR for 120v bed.
Body: Removed the support pillar. print with supports in the appropriate places.
Base: Moved and added a second power switch for SSR. Added hole for a breaker button for SSR.
Shelf: Made a shelf that will accommodate a relay and buck converter used in pi setup. Shelf has ramp to lower section of case to allow for better air flow from fan to SSR heatsink.
Bottom level fans: Shorted the fan casing as much as possible and added a hat that the SSR heatsink can slide onto.
Shelf fans: Made a shelf that will hold three fans to blow air across the relay, buck and SSR.
SSR Heatsink: https://www.amazon.com/gp/product/B08ZCYBPTV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Power Switches: https://www.amazon.com/gp/product/B083NP3ZKC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Breaker: https://www.amazon.com/gp/product/B08RBLZF9L/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Category: 3D Printer Parts