Cali-Dragon display w/color swatch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display your cali-dragons and keep track of filament information with these expandable shelves.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 713
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
I had 2 things I was working on, making swatches of the various types and colors of filament I had so I could keep track of them and a display stand for my cali-dragons which shall hence forth be known as “minions”. I was struggling with a concept I was happy with when I happened across a shelf for the Marvins created by Rodrim and that's when the pieces came together.
I used his basic concept and merged features from my own design to create a self that held 4 minions but was also infinitely expandable vertically.
Each dragon sits on his own little swatch that slides into place on the shelf, you can write on the back with permanent marker basic information like the manufacturer, color name, printing temp etc. This can be easily removed with rubbing alcohol if you ever need to or use a sticker, whatever floats your Benchy.
There are 3, 6x2mm magnets needed for each minion to keep them in place; one for his butt, one in the swatch which is thin enough that it shows through on both sides and then a third on the shelf itself to lock everything in place.
There are 3 basic self designs and all will lock together with dovetail connections and are interchangeable. One shelf is plain with a lattice work design similar to Rodrims creation. The other 2 shelves have a flame design because, dragons, duh!! One has a flame cut out and the other has the flames with a solid back so you can start the print with red or whatever color you want your flames to be, then switch to your main color at the right level.
Shelves should be printed on their backs, I've included a cali-dragon with a hole in his bum for the magnet, nothing else was modified on him.
There are also 2 top bar designs to hide the exposed dovetails on the top shelf, one has flames and the other says Cali-Dragon, there are small tabs that connect the dot on the “i” and the “-” to the rest of the piece.
note: shelves in pictures were printed using Cheps super fast profile with 2 minor adjustments and printed in about 3.5 hours, for the 2 color red and white I swapped out white for the red at layer level 8