Unifi Switch Lite 16 PoE mount for Unifi 6U rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3 part print for a unifi switch lite 16 PoE that perfectly fits into the ubiquiti unifi 6U "toolless" rack.…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 1451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a 3 part print for a unifi switch lite 16 PoE that perfectly fits into the ubiquiti unifi 6U "toolless" rack. It requires 4x M3*16mm bolts, 4x M3 washers, and 4x M3 nuts.
I printed this on an Ender 3v2 with 70C initial layer bed, 65C bed after and 215C nozzle temp. .200 resolution, no skirt/raft/brim (due to build plate size), 30% gyroid infill, and 5 walls. Printed with Inland PLA+ Silver (I tried to get as close to unifi silver color as I could).
This prints with zero supports (put all 3 parts face down on build plate).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
30
Filament: Inland PLA+ Silver How I Designed This ===================
Category: Electronics