Monoprice MP Select Mini V2 X Min Stop Mountini Mount

This is a replacement mount for the Monoprice MP Select Mini V2 X Min Stop switch. This allows removal of the X Gantry affectation.

My belt was getting too loose. So, I read and drank, drank and read. What I determined, based upon my reading and drinking, is that I would remove the X gantry stock belt and install some GT2 belt I had laying around. I cut the old belt and installed the new belt with 3D printed clamps. Great. Test print and do stuff.

I come back to my test print and it looks like hell. More reading and less drinking ensued. I read a lot about timing belts. Turns out, the people who said that the GT2 belt is a replacement for the stock belt were super-wrong.

So, one thing led to another, but suffice to say that:

1. MXL belts cannot be replaced with GT2 belts.
2. The X gantry pulley is the X belt tensioner.
3. Lengths of XML belts are cheaper and easier to install than the stock belt.
4. XML belts are hard to find.
5. The X gantry affectation can be discarded if the X min stop is mounted elsewhere.

So, I actually cut my stock belt, but ended up reinstalling it with a printed clamp and new tension provided by our friend, the newly renamed, X belt tension pulley.

Print Settings

Printer Brand:

Monoprice

Printer:

Rafts:

No

Supports:

Resolution:

.1mm

Infill:

Category: 3D Printer Parts