1 / 5
Remixed IKEA Lack Grommet by thebeetleuk; splits and shortens and stuff — zdjęcie 1
1 / 5

Remixed IKEA Lack Grommet by thebeetleuk; splits and shortens and stuff

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thanks to thebeetleuk for the original set! I really appreciate the work. This is a remix for my desires. In the…

Ocena
5 / 5
Polubienia
2
Pobrania
20
Wydruki
1
Wyświetlenia
210
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Thanks to thebeetleuk for the original set! I really appreciate the work.

This is a remix for my desires. In the listed files, the grommets are shortened to 1"/25mm deep, save one that is deeper. This deeper one is intended to hold a cord plug.

There are some special caps.

There is a split grommet set that uses two 3 X 8mm or longer bolts. It's so one may place a cord that has a plug greater than about 1", but not larger than 1 3/8" (the diameter of the hole saw that I used.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.20

Infill:

20%

Filament: Overture PLA Black


Notes:

For a cleaner appearance, print one at a time.

Custom Section ==============

Category: Household Supplies

Tagi