Schrader Valve Tire Depressurizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool to safely remove air from tires for long term storage while holding cap.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 252
- Wydruki
- 2
- Wyświetlenia
- 1393
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Tool to safely remove air from tires for long term storage while holding cap.
Inside is threaded to standard Schrader thread. Will easily remove air from tires, allowing for storage or compacting of tires.
I have tested this on bike tires, however I have not tested it on car tires.
I leave it up to the printer to try on car tires. Please use responsibly.
Printable in under 15 minutes without supports at .2mm layer height. If thread is too tight, I recommend printing at 101%. Should be printed in a sturdy material. I also recommend printing with bridging settings for overhangs.