1 / 2
Hayward Chlorinator Wrench fits CL200 CL220 CL2002S — zdjęcie 1
1 / 2

Hayward Chlorinator Wrench fits CL200 CL220 CL2002S

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wrench that you can use for your Hayward CL200 Series Chlorinator, make it's much easier to remove the cap. I…

Ocena
5 / 5
Polubienia
9
Pobrania
136
Wydruki
1
Wyświetlenia
511
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

A wrench that you can use for your Hayward CL200 Series Chlorinator, make it's much easier to remove the cap.

I printed this with PLA on a printer with a 300mm x 300mm bed. I had to rotate the print 45 degrees to get it to fit the bed. I used 4 walls, 40% infill and it's plenty strong.

The wrench that I printed fits just right onto the cap, it's not too loose, and it drops right onto the cap.

I designed this to be 20mm thick to be on the safe side, but I think you could scale this down to 15mm thick and still be fine.

I've included various files so that you can adjust this to your needs, including a STEP file and the Fusion 360 file.

This model is not for commercial purposes, please do not sell the model files nor sell prints.

Category: Hand Tools

Tagi