CNC Machine Jog Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your 3d printer look like its older and much wealthier cousins, CNC machines, with this jog wheel.
- Ocena
- 4 / 5
- Polubienia
- 41
- Pobrania
- 82
- Wydruki
- 2
- Wyświetlenia
- 984
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
CNC Machine Jog Wheel
Modeled after the jog wheels found on almost every CNC machine. For some reason I find them fun to use and that has now been brought over to the MK3S+ for me.
The encoder has 20 clicks so the jog wheel has 20 hatch marks on it
One M3 x12mm screw is needed for the small handle and one M3x16mm screw is needed for the large handle
The indicator is stuck on with some adhesive tape
Designed for the dimensional accuracy of ASA, so expect a snug fit if you print with anything else. You can scale it up a bit to get some tolerances for other filaments. No supports needed
.2mm nozzle is recommended, but I checked and everything works with the standard .4mm nozzle. The numbers will just be “hollow”
Update - There was a bit of a wobble I didn't like, so I eliminated it.