Junction Cover with Hotend Cable Strain Relief for Coreception, Elf & SapphirePro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement connection cover with an added strain relief for the VGA cable used to carry the connections…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement connection cover with an added strain relief for the VGA cable used to carry the connections from the controller board.
Remove the OEM Cover and replace with the printed one using M3 x 0.5 x 10mm long cap head socket head screws.
Attach the VGA cable to the strain relief using two (2) standard zip ties.
Complement Vertical Hotend Cable Support mount for the printer: https://www.thingiverse.com/thing:4629549
or https://www.thingiverse.com/thing:4638155
Print Settings
Printer:
SainSmart Coreception-300
Rafts:
No
Supports:
Yes
Resolution:
0.2-0.25mm
Infill:
100%
Filament:
Any ABS, PLA+ or PETG
Any
Notes:
3D print with 20+ BRIM outlines to prevent any warping.
Category: 3D Printer Parts