Liczymy pasujące modele…
2020 profile Aluminum extrusion vertical mount spool holder using five (5) M4 flat head screws and drop-in T-nuts and two (2) 608ZZ roller ball bearings. Best results print the holder and spool center in the same direction to accommodate…
2020 Aluminum extrusion mount filament tubing guide/holder to complement the 20x20 (2020) Vertical Mount Side Spool Holder; thing:4581676. The mounting bracket is visually the same style as the filament holder and will attach using M4 x…
Neither of these prints need supports or anything. Just use more walls for the BMG mount to make it stiffer. So I didn't like the mounts that people had made. For some of them, they needed a different extruder motor since the BMG pushes…
Touchscreen side camera mount for the SainSmart Coreception-300. Camera mounting block permits vertical angle adjustment and the horizontal angle adjustment is made using the horizontal bracket, hinge & clamp block. The horizontal bracket…
Just add Creativity / Elf Logo Print Settings Printer: Creativity Elf Core XY Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Generic PLA Category: 3D Printer Parts
Elevates hotend cable from the controller to a strain relief mounted on the linear rail carriage assembly. Two parts are mirror objects that are fastened together using No. 4 thread forming or M3 sheet metal screws. The third printed part…
This is a replacement connection cover with an added strain relief for the VGA cable used to carry the connections from the controller board. Remove the OEM Cover and replace with the printed one using M3 x 0.5 x 10mm long cap head socket…
Hotend cable support system containing a replacement cover for the X-Axis carriage and a printer top bracket vertical cable support. Print Settings Printer: SainSmart Coreception-300 Rafts: No Supports: Yes Resolution: 0.20-0.30 Infill:…
The Y-Axis Hotend Cable Support is similar to: https://www.thingiverse.com/thing:4629549 A difference is it runs the length of the Y-Axis; the build consists of two (2) top shelves and four (4) mounting brackets assembled using No. 4 or…
After enclosing my printer I noticed the cable would start to curl into the area under the build surface between the lead screw and guide rods. To prevent the transfer of lubricants and or damage to the hotend cable due to contact with…
A mircoswitch replacement for the y axis end stop. Intended to move the end stop to the trigger on the gantry. Use m3 screws on both sides and is adjustable for working with different hotends extruders and whatnot. Category: 3D Printer…
First I really like the design and really look forward to trying this out. These are simply remixed parts to allow this to be used on the coreception/Elf with either the stock or microswiss hotend. I used the mosquito face to create a fan…
Version 4. major changes. I have cut the mount into 2 parts. A gantry plate and a hermera plate. They can both be mounted then secured together via the m3 nut that is pressed in. These can both be assessed on the left side of the gantry.…
Used the CR10 adapter to make an adapter plate to mount a stock or microswiss hotend on a sainsmart coreception 300 or Elf corexy printer. Opened up the bottom tray to allow easier access to the the wire window on the gantry. Added…
Original design done by Stephen Lavedas. Increased the base-plate to allow the carriage to hit the stock y end stop. On the coreception I had to add 4 mm washer to the breakout plate allow clearance. Added a solid versions Added a 2 part…
I created this motor mount for the creativity elf/coreception 300 to mount 48mm steppers without major modifications. print in a high temp filament that will not creep (ex: abs,asa,pc,other.) I printed mine in push plastics CF PC+PBT but…
