Elegoo Mars Quieter Fan Mod - Taller Feet & Fan Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have printed my parts on FDM printer using CF PETG for the fan spacer and TPU for the feet but most resins should…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 1739
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have printed my parts on FDM printer using CF PETG for the fan spacer and TPU for the feet but most resins should also work. Feet can be made a bit smaller (thinner - let me know if you want smaller version).
Changing the FAN Requires:
1x Fan (any 80mm)
1x Fan Spacer (if fan is more than 15mm thick)
4x Feet (If mounting the fan outside)
Feet use stock feet as inserts so no screws etc are needed.
Stock Screws for fans can be re-used.
Images show more or less a step by step by step guide. I am NOT responsible to any damage you might make you your machine. BE VERY CAREFUL OF THE LCD AND THE RIBBON CABLES WHEN REMOVING ANY PARTS. I recommend watching https://www.youtube.com/watch?v=nifBZ5Mh2Rg the board does not need to be removed but you will need to remove the front LCD.
Print instructions
Category: 3D Printer Accessories