WB1616 Controller Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts for the WB1616 controller from Wally's Lights.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The “WB1616 Flat Mount” is for mounting the controller into a CG1500 type box. M3x20mm and M3xx8mm are uses to attach the controller. #4-40x3/4" and #4-40x1/4" can also be used. It can be printed without supports.
The “WB1616 Meanwell Mount” is for mounting the controller to a LRS-350 Meanwell power supply. It must be printed upside down with supports. The “Spacer” are then used to support the bottom and left side of the controller. M3x20mm or #4-40x3/4" are used to attach the controller to the mount.
Printed on a Voron 2.4 in PLA with 0.4mm nozzle, 0.3mm layer height, 3 perimeters, 3mm brim