1 / 3
WB1616 Controller Mounts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
The “WB1616 Flat Mount” is for mounting the controller into a CG1500 type box. M3x20mm and M3xx8mm are uses to attach the controller. #4-40x3/4" and #4-40x1/4" can also be used. It can be printed without supports.
The “WB1616 Meanwell Mount” is for mounting the controller to a LRS-350 Meanwell power supply. It must be printed upside down with supports. The “Spacer” are then used to support the bottom and left side of the controller. M3x20mm or #4-40x3/4" are used to attach the controller to the mount.
Printed on a Voron 2.4 in PLA with 0.4mm nozzle, 0.3mm layer height, 3 perimeters, 3mm brim