Bird feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple bird feeder using a 1.5 liter pet bottle. Intended to work with sunflower seeds.
- Ocena
- 4 / 5
- Polubienia
- 18
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 1505
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Simple bird feeder using a 1.5 liter pet bottle.
Intended to work with sunflower seeds.
Post-Printing
Cut the bottom and top of the pet bottle. The resulting hole in the top of the bottle should be approximately the size of the hole in the "feeding_tray_mount.stl" (the smaller diameter of the funnel part).
Mount the "Feeding_tray.stl" by putting the "feeding_tray_mount.stl" into the bottle and screwing them together with an M3 screw.
Use the handle mount to mark where you want the holes for the handle in the pet-bottle. Then make 3mm holes there.
Thread the handle to the opening in the roof and connect it with the handle mount with two "washer.stl" and two M3 screws.
Category: Outdoor & Garden