Bird feeder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple bird feeder using a 1.5 liter pet bottle. Intended to work with sunflower seeds.
- Rating
- 4 / 5
- Likes
- 18
- Downloads
- 69
- Makes
- 1
- Views
- 1,505
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Simple bird feeder using a 1.5 liter pet bottle.
Intended to work with sunflower seeds.
Post-Printing
Cut the bottom and top of the pet bottle. The resulting hole in the top of the bottle should be approximately the size of the hole in the "feeding_tray_mount.stl" (the smaller diameter of the funnel part).
Mount the "Feeding_tray.stl" by putting the "feeding_tray_mount.stl" into the bottle and screwing them together with an M3 screw.
Use the handle mount to mark where you want the holes for the handle in the pet-bottle. Then make 3mm holes there.
Thread the handle to the opening in the roof and connect it with the handle mount with two "washer.stl" and two M3 screws.
Category: Outdoor & Garden