Elephants Foot Test Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fast, low cost print I use to dial out any elephants foot on my models by changing my z offset.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 421
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Measure flat side to flat side on the bottom and the top of the model using callipers, they should both be 20mm. Elephants foot will make the bottom bigger. Its important to measure the very bottom of the model as elephants foot only effects first few layers.
The print also has a hole in the middle that can be used to join two test prints together as shown, There is .2mm of clearance between so they should fit together loosely if printer is tuned well.
I've added a smaller but faster print time version that functions the same!